fbpx

CCNP Service Provider

CCNP Service Provider Overview

Octa Networks is Mumbai most trusted training Centre for CCNP Service Provider Course. We offer high-end training to candidates in our 24×7 on Cisco real devices. Our Training Centre is situated in Mumbai. Octa Networks is considered as one of the innovative, reliable and prestigious CCNP Service Provider Training Institute in Mumbai. We also provide Corporate and Summer Training in Mumbai.

The Cisco Certified Network Professional Service Provider certification is for service provider network engineers, systems engineers, and network specialists who want to deliver a scalable carrier-grade infrastructure capable of rapid expansion to support ongoing introduction of new managed services. This job role-based certification teaches you to configure, implement, troubleshoot, and optimize service provider IP next-generation network infrastructures bringing value and competitive advantage to your company.

CCNP Service Provider Course is divided into four categories.
  • SPROUTE – Deploying Cisco Service Provider Network Routing
  • SPADVROUTE – Deploying Cisco Service Provider Advanced Network Routing v1.2
  • SPCORE – Implementing Cisco Service Provider Next-Generation Core Network Services v1.2
  • SPEDGE – Implementing Cisco Service Provider Next-Generation Edge Network Services v1.2

Key Features of CCNP Service Provider Training:

  • Candidates are provided guaranteed training on Cisco Physical Devices.
  • CCNP Service Provider Concepts are explained theoretically and practically on the Cisco Physical Devices.
  • Students have 24*7 access to the Lab.
  • 160+ hours of training in classroom with interactive whiteboard and projector.
  • Candidates can appear for the repeat classes unlimited times.
  • Classrooms are equipped with projectors, Wi-Fi connectivity, and Digital Pads.
  • Batches are available from early morning to late night.
  • Trainers/Mentors 24×7 availability.
  • Our Trainers are Cisco certified and highly experienced.

Devices to be used during the Training Program:

  • Hardware
    • Cisco CRS Series
    • Cisco XR 12000 Series
    • Cisco ASR Series
    • Cisco 7600 Series
    • Cisco Catalyst Switches
    • Cisco ME Series Switches
  • Software
    • Cisco IOS
    • Cisco IOS XR
    • Cisco IOS XE

Training Plan

Training Schedule
Weekdays (Mon-Fri) Weekend (Sat-Sun)
Duration 4 weeks 2 Months
Hours 4 Hours / day 6 Hours / day
Fees 30,000 + Taxes 30,000 + Taxes
Training Mode Online/Onsite Online/Onsite

Group Discount
In a Group of 2 discount will be 10% per head
In a Group of 3 discount will be 15% per head
In a Group of 4 discount will be 20% per head

Trainer's Profile

JAGDISH RATHOD

JAGDISH RATHOD

CCNA/CCNP-RNS/SP

Having a degree of M.Tech Computer Engineering with specialization in Networking Gold Medalist (University First) and BE Information Technology (Class First), Jadish had joined Octa Networks in 2017. He is a CCIE (R&S – Written), CCNP (R&S), CCNA (R&S) certified, highly experienced and extremely driven senior technical instructor and network consultant. He is young and dedicated trainer of the Octa Networks technical team and also one of the star trainer and passionate training professional.

He guides thousands of students across the world like INDIA, China, Kenya and UAE, Africa, CANADA, Pakistan, Australia and USA and builds a strong foundation of networking which serves a long way in gaining expertise. Jagdish has worked with TOP MNC IT company and ISP (Dimension data and Ishan Netsol) as a network Engineer for more than 3 years. Thus, have a deep understanding of multi vendor networking devices like Cisco, Juniper, extreme and huawei, Firewall, Checkpoint, ASA. In addition, he has a in depth knowledge of protocols like MPLS, BGP, OSPF, EIGRP, IPv4, IPV6, SNMP, SYSLOG and Switching Technologies like RSTP, MSTP, STP, Ether channel, Flex link. He has also expert in QOS, Traffic engineering, ISIS and Multicasting.

He is an experienced mentor, he knows the requirements of students and guides them to the best. When he is not busy training students at Octa Networks, he spends hours and hours in drafting, practical workbooks for making CCNP journey easy for the students. He himself spends hours practicing in the labs to polish his skills and always learn new technologies

Lab Facility

CCNP Service Provider Course Details

Target Audience

  • Network engineer with at least one year of professional experience and CCNA Routing and Switching or CCNA Service Provider Certification who want to enhance their skills and acquire in-depth know-how in complex Service Provider Network.

Prerequisite:

  • Valid CCNA Service Provider certification or any CCIE certification.
  • The knowledge and skills that a learner must have before attending this Curriculum are as follows:
    • IPv4 and IPv6 addressing schemes
    • Configure switched network technologies
    • Routed network technologies
    • Configure IP services
    • Configure Cisco operating systems and platforms
    • Configure transport technologies
    • Configure access and edge technologies
    • Configure security in the network
    • MPLS, multicast, and high availability
    • Configure network management
    • VPN technologies

Topics:

642-883 SPROUTE

1.0 OSPFv2 and OSPFv3 Routing in Service Provider Environments

1.1 Describe multi-area OSPFv2 and OSPFv3 operations

1.2 Implement multi-area OSPFv2 and OSPFv3 on IOS-XR and IOS-XE

1.3 Implement different OSPF areas (stubby, totally stubby, NSSA) on IOS-XR and IOS-XE

1.4 Implement OSPF neighbor authentication on IOS-XR and IOS-XE

1.5 Troubleshoot OSPF IOS-XR and IOS-XE configuration errors

2.0 IS-IS, IPv4, and IPv6 in Service Provider Environments

2.1 Describe multi-area IS-IS operations

2.2 Implement multi-area IS-IS for IPv4 and IPv6 on IOS-XR and IOS-XE

2.3 Implement IS-IS neighbor authentication on IOS-XR and IOS-XE

2.4 Troubleshoot IS-IS IOS-XR and IOS-XE configuration errors

3.0 BGP Routing in Service Provider Environments

3.1 Describe the Internet routing hierarchy: Network Service Providers (NSP), Network Access Point (NAP), ISP Tiers (Tier 1, 2 and 3)

3.2 Describe connectivity between an enterprise network and an SP that requires the use of BGP

3.3 Describe connectivity between a SP and upstream SPs

3.4 Describe BGP transit AS operations

3.5 Implement EBGP and IBGP on IOS-XR and IOS-XE

3.6 Implement BGP neighbor authentication on IOS-XR and IOS-XE

3.7 Optimize BGP IOS-XR configurations using af-groups, session-groups, and neighbor-groups

3.8 Optimize BGP IOS-XE configurations using peer-groups

3.9 Influence BGP route selection by using various BGP attributes on IOS-XR and IOS-XE

3.10 Troubleshoot BGP IOS-XR and IOS-XE configuration errors

4.0 Route Manipulations in Service Provider Environments

4.1 Implement Routing Policy Language (RPL) to configure a desired routing policy on IOS-XR

4.2 Implement Route-Maps to configure a desired routing policy on IOS-XE

4.3 Implement route filterings using prefix-list, distribute-list, and as-path list on IOS-XE

4.4 Implement route redistributions on IOS-XR and IOS-XE

5.0 High Availability Routing Features

5.1 Implement NSF/NSR/Graceful Restart for OSPF on IOS-XR and IOS-XE

5.2 Implement NSF/NSR/Graceful Restart for IS-IS on IOS-XR and IOS-XE

5.3 Implement Bidirectional Forwarding Detection (BFD) for OSPF on IOS-XR and IOS-XE

5.4 Implement Bidirectional Forwarding Detection (BFD) for IS-IS on IOS-XR and IOS-XE

642-885 SPADVROUTE

1.0 BGP Routing Features in a Service Provider IP NGN Environment

1.1 Describe the BGP routing processes in IOS-XR

1.2 Configure the BGP timers on IOS-XR and IOS-XE

1.3 Describe the need for BGP confederations in BGP transit backbones

1.4 Design and implement BGP route reflectors to scale IBGP in BGP transit backbones on IOS-XR and IOS-XE

1.5 Implement BGP in SP IP NGN IOS-XR and IOS-XE PE routers to support multi-homed BGP Customers

1.6 Implement Remote Triggered Blackhole Filtering (RTBF) on IOS-XR and IOS-XE

1.7 Implement BGP TTL security on IOS-XR and IOS-XE

1.8 Implement BGP maximum-prefix on IOS-XR and IOS-XE

1.9 Implement BGP route dampening on IOS-XR and IOS-XE

1.10 Troubleshoot BGP IOS-XR and IOS-XE configuration errors in service provider environments

1.11 Optimize BGP IOS-XR configurations using af-groups, session-groups, and neighbor-groups

1.12 Optimize BGP IOS-XE configurations using peer-groups

2.0 Multicast Routing in a Service Provider IP NGN Environment

2.1 Describe Multicast Concepts (multicast distribution trees, multicast routing protocols and IGMP operations)

2.2 Describe Any-source multicast (ASM) versus Source Specific Multicast (SSM)

2.3 Describe Intra Domain versus Inter Domain Multicast Routing

2.4 Describe the mapping of multicast IP addresses to MAC addresses

2.5 Describe and illustrate how RPF check can fail if the unicast and multicast topologies are non-congruent

2.6 Describe multiprotocol BGP functions in mroute distribution

2.7 Describe the principles and operations of PIM-SM

2.8 Describe multicast source discovery protocol (MSDP) operations

2.9 Describe methods used to secure multicast

2.10 Implement PIM-SM operations on IOS-XR and IOS-XE

2.11 Implement Auto-RP, PIMv2 BSR, Anycast RP on IOS-XR and IOS-XE

2.12 Implement Bi-Dir PIM operations in SP IP NGN environment on IOS-XR and IOS-XE

2.13 Implement SSM operations on IOS-XR and IOS-XE

2.14 Implement MSDP operations on IOS-XR and IOS-XE

2.15 Troubleshoot multicast routing IOS-XR and IOS-XE configurations errors in service provider environments

3.0 IPv6 in a Service Provider IP NGN Environment

3.1 Describe DNS and DHCP operation in IPv6

3.2 Describe the fields that are used in the IPv6 header to support QoS functions

3.3 Describe Cisco IOS/IOS-XE and IOS-XR IPv6 network management and troubleshooting tools like traceroute/ping

3.4 Describe dual-stack implementations

3.5 Describe IPv6 tunneling mechanisms

3.6 Configure IPv6 multicast routing

3.7 Configure static IPv6-in-IPv4 tunnels on IOS-XR and IOS-XE

3.8 Configure dynamic 6to4 tunnels on IOS-XR and IOS-XE

4.0 High Availability Routing Features

4.1 Implement NSF/NSR/Graceful Restart for BGP on IOS-XR and IOS-XE

4.2 Implement Bidirectional Forwarding Detection (BFD) for BGP on IOS-XR and IOS-XE

4.3 Implement high availability and optimization multicast routing features on IOS-XR and IOS-XE

642-887 SPCORE

1.0 QOS in a Service Provider IP NGN Environment

1.1 Describe the DiffServ and IntServ QoS models

1.2 Describe the QoS mechanisms (classification and marking, congestion management and avoidance, traffic policing and shaping)

1.3 Describe IPv6 Flow Label

1.4 Describe trust boundaries in enterprise and SP environments

1.5 Describe Cisco MQC for QoS configurations

1.6 Describe hierarchical QoS configurations

1.7 Describe the Cisco NBAR feature for discovering network protocols and for packets classifications

1.8 Describe the typical Edge PE routers and Core P routers QoS requirements

1.9 Implement classification and marking in an inter-domain network using QPPB on Cisco IOS-XR and IOS-XE

1.10 Implement class-based markings on Cisco IOS-XR and IOS-XE

1.11 Implement QoS pre-classify on tunnel interface on Cisco IOS-XR and IOS-XE

1.12 Implement CB-WFQ on Cisco IOS-XR and IOS-XE

1.13 Implement LLQ on Cisco IOS-XR and IOS-XE

1.14 Implement WRED on Cisco IOS-XR and IOS-XE

1.15 Implement traffic policing on Cisco IOS-XR and IOS-XE

1.16 Implement traffic shaping on Cisco IOS-XR and IOS-XE

1.17 Describe LPTS and hardware rate limiters on Cisco IOS-XR routers

1.18 Describe MPLS EXP bits

1.19 Describe MPLS QoS implementation concepts and models

1.20 Implement MPLS DiffServ tunneling on Cisco IOS-XR and IOS-XE

1.21 Troubleshoot QoS IOS-XR and IOS-XE configuration errors

2.0 MPLS/LDP in a Service Provider IP NGN Environment

2.1 Describe the CEF, FIB, LFIB and LIB tables on Cisco routers

2.2 Describe MPLS labels and label stack operations on Cisco routers

2.3 Describe LDP operations in Cisco routers

2.4 Describe MPLS OAM (MPLS LSP ping and MPLS traceroute)

2.5 Describe MPLS applications in service provider environment

2.6 Implement LDP on Cisco IOS-XR and IOS-XE

2.7 Implement LDP high availability features on Cisco IOS-XR and IOS-XE

2.8 Troubleshoot LDP on IOS-XR and IOS-XE configuration errors

3.0 MPLS/LDP in a Service Provider IP NGN Environment

3.1 Describe MPLS traffic engineering (TE) concepts

3.2 Describe MPLS TE constraint-based path computations

3.3 Describe the details of MPLS TE tunnels, including path setup procedures and path maintenance

3.4 Describe methods of assigning traffic into MPLS TE tunnels

3.5 Implement MPLS TE tunnels on Cisco IOS-XR and IOS-XE

3.6 Implement MPLS TE bandwidth control on Cisco IOS-XR and IOS-XE

3.7 Implement MPLS TE link and node protections on Cisco IOS-XR and IOS-XE

4.0 Transport Technologies

4.1 Describe the SP core transition from ATM/SONET/SDH based backbone to

packet based IP/MPLS backbone

4.2 Implement 10/40/100 Gigabit Ethernet Interfaces on Cisco IOS-XR routers

4.3 Describe DWDM, IPoDWDM and ROADM

4.4 Implement IPoDWDM controller/interface on Cisco IOS-XR routers

642-889 SPEDGE

1.0 VPN in Service Provider IP NGN Environments

1.1 Describe VPN implementation models (overlay, peer-to-peer)

1.2 Describe VPN technologies (L2TPv3, GRE, IPsec VPN, SSLVPN, DMVPN, GETVPN)

1.3 Describe L2 vs L3 VPNs

2.0 MPLS layer 3 VPNs in Service Provider IP NGN Environments

2.1 Describe MPLS L3 VPN architecture and operations (RDs, RTs, VRFs, MP-BGP, PE-CE routing)

2.2 Describe the design models for combining Internet access with MPLS L3 VPN services

2.3 Describe the various methods used to deploy IPv6 over MPLS (6PE and 6VPE)

2.4 Implement MP-BGP between PE routers on IOS-XR and IOS-XE

2.5 Implement PE-CE routings (static, EIGRP, OSPF, BGP) on IOS-XR and IOS-XE

2.6 Implement complex MPLS layer 3 VPNs on IOS-XR and IOS-XE

2.7 Implement carrier supporting carrier (CSC) on IOS-XR and IOS-XE

2.8 Troubleshoot MPLS L3 VPNs IOS-XR and IOS-XE configuration errors in service provider environments

3.0 Layer 2 VPNs in Service Provider IP NGN Environments

3.1 Describe L2TPv3 VPNs over an IP core network

3.2 Describe L2 VPNs (AToM and VPLS) over an IP/MPLS core network

3.3 Describe AToM Interworking

3.4 Implement AToM on IOS-XR and IOS-XE

4.0 Carrier Ethernet in Service Provider IP NGN Environments

4.1 Describe Carrier Ethernet forums and standards (MEF, IEEE, IETF)

4.2 Describe the concepts of User PE (U-PE) and Network PE (N-PE)

4.3 Describe E-Line versus E-LAN versus E-Tree

4.4 Describe QinQ tunneling

4.5 Describe Provider Backbone Bridge (PBB – aka MAC-in-MAC)

4.6 Describe VPWS versus VPLS

4.7 Describe VPLS versus H-VPLS

4.8 Describe VPLS signaling using LDP or BGP

4.9 Implement QinQ on Cisco ME 3400 Series Switches

4.10 Implement VPLS on IOS-XR and IOS-XE

Candidates need to undertake below exam

Exam Name: Exam Code : Fees Duration: Registration:
Deploying Cisco Service Provider Network Routing (SPROUTE) 642-883 SPROUTE
(65-75 questions)
$300 90 minutes Pearson VUE
Deploying Cisco Service Provider Advanced Routing (SPADVROUTE) 642-885 SPADVROUTE
(65-75 questions)
$300 90 minutes Pearson VUE
Implementing Cisco Service Provider Next-Generation Core Network Services (SPCORE) 642-887 SPCORE
(65-75 questions)
$300 90 minutes Pearson VUE
Implementing Cisco Service Provider Next-Generation Edge Network Services (SPEDGE) 642-889 SPEDGE
(65-75 questions)
$300 90 minutes Pearson VUE

Upon completion of this course candidates will learn:

SPROUTE - Deploying Cisco Service Provider Network Routing:
  • Service provider routing protocols
  • Implement OSPF in the service provider network
  • Implement integrated IS-IS in the service provider network
  • Implement BGP in the service provider network
  • Routing protocol pools and route manipulation
  • Outputs are updated with the latest IOS, IOS XE, and IOS XR versions
SPADVROUTE - Deploying Cisco Service Provider Advanced Network Routing v1.2
  • Configure the provider network to support multiple BGP connections with customers and other autonomous systems
  • Common routing and addressing scalability issues in the provider network
  • Available BGP tools and features to secure and optimize the BGP routing protocol in a service provider environment
  • IP multicast services and the technologies that are present in IP multicasting
  • PIM-SM as the most current scalable IP multicast routing protocol
  • Service provider IPv6 transition implementations
SPCORE - Implementing Cisco Service Provider Next-Generation Core Network Services v1.2
  • Features of MPLS and how MPLS labels are assigned and distributed
  • Requirements for traffic engineering in modern networks that must attain optimal resource utilization
  • QoS and the need to implement it
  • Classify and mark network traffic to implement an administrative policy requiring QoS
  • Cisco QoS queuing mechanisms used to manage network congestion
  • Traffic policing and shaping, including token bucket, dual token bucket, and dual-rate policing
SPEDGE - Implementing Cisco Service Provider Next-Generation Edge Network Services v1.2
  • VPN technologies used in the service provider environment
  • Multiprotocol Label Switching (MPLS) VPN peer-to-peer architecture
  • Steps to provide MPLS Layer 3 VPN service in service provider networks
  • Use the MPLS Layer 3 VPN model to implement managed services and Internet access
  • Layer 2 VPNs and Ethernet services
  • Traffic policing and shaping, including token bucket, dual token bucket, and dual-rate policing

Candidates will have Employment Opportunities with following Job Title:

  • Level 2 Service Provider Network Engineers
  • Level 2 Service Provider System Engineers
  • Level 2 Service Provider Network Specialists
  • Level 2 Channel Partner Sales Engineers
  • Level 2 Channel Partner Field Engineers

Schedule

Upcoming Batches
Weekday Batch : Weekend Batch:
On Request On Request


Frequently Asked Question

What is CCNP Service Provider Certification?

The Cisco Certified Network Professional Service Provider certification is for service provider network engineers, systems engineers, and network specialists who want to deliver a scalable carrier-grade infrastructure capable of rapid expansion to support ongoing introduction of new managed services. This job role-based certification teaches you to configure, implement, troubleshoot, and optimize service provider IP next-generation network infrastructures bringing value and competitive advantage to your company.

What is the duration of CCNP Service Provider course?

The duration of course depends on the batch you select. Regular (mon – fri) classroom training takes 8 weeks or 160 hours, or Weekend (sat – sun) classroom training takes 2 Months or 160 hours. You can choose and check out the schedule and fees accordingly

When do I get my CCNP Service Provider certificate after passing an exam?

As per the procedures, printed CCNP Service Provider Certification takes 6-8 weeks to reach you by mail. Check the status of your certificate in your Certification Tracking System. Date with a “Mailed” status implies the dispatch of your certificate on that date. No status found or 8 weeks are over, register a case with Certification & Communities Online Support team at www.cisco.com/go/certsupport.

What does the CCNP Service Provider program cover?

• SPROUTE – Deploying Cisco Service Provider Network Routing
• SPADVROUTE – Deploying Cisco Service Provider Advanced Network Routing v1.2
• SPCORE – Implementing Cisco Service Provider Next-Generation Core Network Services v1.2
• SPEDGE – Implementing Cisco Service Provider Next-Generation Edge Network Services v1.2

What is the exam code of current version of CCNP Service Provider Certification?

There are 4 exams in CCNP Service Provider:
• 642-883 SPROUTE
• 642-885 SPADVROUTE
• 642-887 SPCORE
• 642-889 SPEDGE

What are prerequisites for the CCNP Service Provider Certification?

• Valid CCNA Service Provider certification or any CCIE certification can act as a prerequisite.
• Knowledge from CCNA Service Provider Training.

What study material are referred for CCNP Service Provider training?

Cisco press books, latest workbooks prepared & revised regularly by experts.

How much am I expected to earn once I get CCNP Service Provider Certified?

Fresher may earn between 4,00,000 – 6,00,000 INR which may increase significantly with work experience, improved hands-on skills and other related factors.

Is online mode available for the CCNP Service Provider training?

Yes. The batches are available in both weekdays as well as weekends in morning and evening sessions.

What are the facilities that Octa Networks provide for CCNP Service Provider Certification?

We provide lab training facility in Asia with 24×7 Lab access with rack and lab administrator guide. We offer great value for money to all our candidates through Personality development sessions. Our training is best in Mumbai and our trainers are CCIE Certified.

Is weekend training available for working professionals?

• Service Provider Network Engineers
• Service Provider System Engineers
• Service Provider Network Specialists
• Channel Partner Sales Engineers
• Channel Partner Field Engineers

How to get recertified in CCNP Service Provider? Is it necessary?

CCNP Service Provider certification is valid for three years.
To recertify, pass ONE of the following before the certification expiration date:
• Pass any current 642-XXX Professional-level or any 300-XXX Professional-level exam, or
• Pass any current CCIE Written Exam, or
• Pass the current CCDE Written Exam OR current CCDE Practical Exam, or
• Pass the Cisco Certified Architect (CCAr) interview AND the CCAr board review to extend lower certifications.

How many questions does the CCNP Service Provider certification exam consist of?

• 642-883 SPROUTE = 65 – 75 questions
• 642-885 SPADVROUTE = 65 – 75 questions
• 642-887 SPCORE = 65 – 75 questions
• 642-889 SPEDGE = 65 – 75 questions

Reviews & Comments

Student Reviews

#CCNP_Jan_2019
#Octa_Networks
Yesterday we learned the basics of BGP including property, message types, states,role of igp into bgp and Rathod sir explained how messages are involved with states of bgp.
I left the class after half session because of office work 😞 and could not attend the remaining last 45 minuets.
But one thing is best and will be always best that our Trainer Jagdish Sir is always in positive mode and clear our doubt positively.
Thank you Jagdish sir, Arshad Sir and Octa networks for providing such an opportunity to learn the technology.
Jagdish Sir is doing his best in all session with same energy……….

My self Krishnendu form Kolkata i have attended CCNA Service provider and CCNP routing and Switching training from Octa Network. My trainer is Mr jagdish Rathod. He teaches us everything in detail. Today we have competed HSRP, VRRP and GLBP theory as well as Practical sessions. I have cleared all my doubts related to HSRP. Thank you Octa Networks, Rathod Jagdish, Arshad Dhunna, and Joaquim Fernandes sir.

I have attended the CCNA Wireless 8am-10am class.I learnt about RRM and AP group RF. Mr.Vibhor Sir explained these concept in very well manner.He keeps the session very interactive and solves all the queries raised by Students.Thanks Octa networks for providing such a talented mentor.

Thank You Octa Networks arshad Dhunna and Joaquim Fernandes for providing this Great Opportunity.

Yes its true 🤩

First of all I am giving 100/100 and I strongly recommended Octa Networks to all from this entire world that if want to start your carrier in Networking field (it doesn’t matter you are from technical background on not) Octa Networks will makes you champion in Networking (CCNA, CCNP, CCIE in all tracks).

Wish you all the best Octa Networks. Arshad Dhunna. Rathod Jagdish.

Amitesh Arnav, India

Attending CCNA Security class from Manuhar Khan, he is delivering very good security lecture, very polite & answer all the queries. One thing that I must tell you about him, his example are really interesting by relating real environment, That you can’t forget easily.

Recommending OCTA NETWORKS
👌👌👌👌👌

Shan Vel

Octa network is such great place . To hole world global training Centre . I such a trainer is Jagdish Rathore sir provide training CCNA. / CCNP/ CCIE tramendous.. there his mind set .it’s great mentor , trainer , motivations .he is practically Person. Repeated every dout particular topic Clear..

Gaurav Kabre

Currently, I am taking CCNA Data Center training which is lead by Mr. Ronak Vyas. I appreciate his efforts in guiding and explaining the DC concepts. Also, he answers all the questions or doubts raised by the participants after explaining the topic.

Mr.Ronak very well explained step by step on concepts like UCS, OTV and VPC in Lab rack setup practically.
Thanks Octa Networks


Get In Touch

Request a call back